Differences

This shows you the differences between two versions of the page.

router2differentareassumm [2009/09/13 14:37] (current)
Line 1: Line 1:
 +===IOS Version Information and Router Information===
 +===check out if we are DTE or DCE:===
 +
 +===our configuration:===
 +
 +===show & debugging:===
 +
 +show iproute without route summarization
 +<code>
 +RT2#show ip route
 +Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
 +      D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
 +      N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
 +      E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
 +      i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
 +      ia - IS-IS inter area, * - candidate default, U - per-user static route
 +      o - ODR, P - periodic downloaded static route
 +
 +Gateway of last resort is not set
 +
 +    10.0.0.0/32 is subnetted, 2 subnets
 +C      10.1.1.2 is directly connected, Loopback0
 +i L2    10.1.1.1 [115/20] via 192.168.1.1, Serial0/0
 +    11.0.0.0/24 is subnetted, 1 subnets
 +i L2    11.1.1.0 [115/20] via 192.168.1.1, Serial0/0
 +    192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks
 +C      192.168.1.1/32 is directly connected, Serial0/0
 +C      192.168.1.0/30 is directly connected, Serial0/0
 +</code>
 +
 +
 +show iproute without route summarization
 +<code>
 +RT2#show ip route
 +Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
 +      D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
 +      N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
 +      E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
 +      i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
 +      ia - IS-IS inter area, * - candidate default, U - per-user static route
 +      o - ODR, P - periodic downloaded static route
 +
 +Gateway of last resort is not set
 +
 +    10.0.0.0/32 is subnetted, 2 subnets
 +C      10.1.1.2 is directly connected, Loopback0
 +i L2    10.1.1.1 [115/20] via 192.168.1.1, Serial0/0
 +    11.0.0.0/16 is subnetted, 1 subnets
 +i L2    11.1.0.0 [115/20] via 192.168.1.1, Serial0/0
 +    192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks
 +C      192.168.1.1/32 is directly connected, Serial0/0
 +C      192.168.1.0/30 is directly connected, Serial0/0
 +</code>
 +
 +with the following line route summarization is shown:
 +"i L2    11.1.0.0 [115/20] via 192.168.1.1, Serial0/0"
 +
 +===check out if RT1 is reachable:===
 
router2differentareassumm.txt · Last modified: 2009/09/13 14:37 (external edit)
 
Except where otherwise noted, content on this wiki is licensed under the following license:CC Attribution-Noncommercial-Share Alike 3.0 Unported
Recent changes RSS feed Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki