Starting - reading configuration files ...
reread_config:  reading radiusd.conf
Config:   including file: /etc/raddb/proxy.conf
Config:   including file: /etc/raddb/clients.conf
Config:   including file: /etc/raddb/snmp.conf
Config:   including file: /etc/raddb/eap.conf
Config:   including file: /etc/raddb/sql.conf
 main: prefix = "/usr/local"
 main: localstatedir = "/var"
 main: logdir = "/var/log/radius"
 main: libdir = "/usr/local/lib"
 main: radacctdir = "/var/log/radius/radacct"
 main: hostname_lookups = no
 main: max_request_time = 30
 main: cleanup_delay = 5
 main: max_requests = 1024
 main: delete_blocked_requests = 0
 main: port = 1645
 main: allow_core_dumps = no
 main: log_stripped_names = no
 main: log_file = "/var/log/radius/radius.log"
 main: log_auth = no
 main: log_auth_badpass = no
 main: log_auth_goodpass = no
 main: pidfile = "/var/run/radiusd/radiusd.pid"
 main: user = "(null)"
 main: group = "(null)"
 main: usercollide = no
 main: lower_user = "no"
 main: lower_pass = "no"
 main: nospace_user = "no"
 main: nospace_pass = "no"
 main: checkrad = "/usr/local/sbin/checkrad"
 main: proxy_requests = yes
 proxy: retry_delay = 5
 proxy: retry_count = 3
 proxy: synchronous = no
 proxy: default_fallback = yes
 proxy: dead_time = 120
 proxy: post_proxy_authorize = no
 proxy: wake_all_if_all_dead = no
 security: max_attributes = 200
 security: reject_delay = 1
 security: status_server = no
 main: debug_level = 0
read_config_files:  reading dictionary
read_config_files:  reading naslist
Using deprecated naslist file.  Support for this will go away soon.
read_config_files:  reading clients
read_config_files:  reading realms
radiusd:  entering modules setup
Module: Library search path is /usr/local/lib
Module: Loaded exec 
 exec: wait = yes
 exec: program = "(null)"
 exec: input_pairs = "request"
 exec: output_pairs = "(null)"
 exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec) 
Module: Loaded expr 
Module: Instantiated expr (expr) 
Module: Loaded PAP 
 pap: encryption_scheme = "crypt"
Module: Instantiated pap (pap) 
Module: Loaded CHAP 
Module: Instantiated chap (chap) 
Module: Loaded MS-CHAP 
 mschap: use_mppe = yes
 mschap: require_encryption = no
 mschap: require_strong = no
 mschap: with_ntdomain_hack = no
 mschap: passwd = "(null)"
 mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap) 
Module: Loaded System 
 unix: cache = no
 unix: passwd = "(null)"
 unix: shadow = "(null)"
 unix: group = "(null)"
 unix: radwtmp = "/var/log/radius/radwtmp"
 unix: usegroup = no
 unix: cache_reload = 600
Module: Instantiated unix (unix) 
Module: Loaded eap 
 eap: default_eap_type = "peap"
 eap: timer_expire = 60
 eap: ignore_unknown_eap_types = no
 eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
 gtc: challenge = "Password: "
 gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
 tls: rsa_key_exchange = no
 tls: dh_key_exchange = yes
 tls: rsa_key_length = 512
 tls: dh_key_length = 512
 tls: verify_depth = 0
 tls: CA_path = "(null)"
 tls: pem_file_type = yes
 tls: private_key_file = "/etc/raddb/certs/cert-srv.pem"
 tls: certificate_file = "/etc/raddb/certs/cert-srv.pem"
 tls: CA_file = "/etc/raddb/certs/demoCA/cacert.pem"
 tls: private_key_password = "whatever"
 tls: dh_file = "/etc/raddb/certs/dh"
 tls: random_file = "/dev/urandom"
 tls: fragment_size = 1024
 tls: include_length = yes
 tls: check_crl = no
 tls: check_cert_cn = "(null)"
 tls: cipher_list = "(null)"
 tls: check_cert_issuer = "(null)"
rlm_eap_tls: Loading the certificate file as a chain
rlm_eap: Loaded and initialized type tls
 peap: default_eap_type = "mschapv2"
 peap: copy_request_to_tunnel = no
 peap: use_tunneled_reply = no
 peap: proxy_tunneled_request_as_eap = no
rlm_eap: Loaded and initialized type peap
 mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap) 
Module: Loaded preprocess 
 preprocess: huntgroups = "/etc/raddb/huntgroups"
 preprocess: hints = "/etc/raddb/hints"
 preprocess: with_ascend_hack = no
 preprocess: ascend_channels_per_line = 23
 preprocess: with_ntdomain_hack = no
 preprocess: with_specialix_jetstream_hack = no
 preprocess: with_cisco_vsa_hack = no
Module: Instantiated preprocess (preprocess) 
Module: Loaded realm 
 realm: format = "suffix"
 realm: delimiter = "@"
 realm: ignore_default = no
 realm: ignore_null = no
Module: Instantiated realm (suffix) 
Module: Loaded files 
 files: usersfile = "/etc/raddb/users"
 files: acctusersfile = "/etc/raddb/acct_users"
 files: preproxy_usersfile = "/etc/raddb/preproxy_users"
 files: compat = "no"
Module: Instantiated files (files) 
Module: Loaded Acct-Unique-Session-Id 
 acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique) 
Module: Loaded detail 
 detail: detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
 detail: detailperm = 384
 detail: dirperm = 493
 detail: locking = no
Module: Instantiated detail (detail) 
Module: Loaded radutmp 
 radutmp: filename = "/var/log/radius/radutmp"
 radutmp: username = "%{User-Name}"
 radutmp: case_sensitive = yes
 radutmp: check_with_nas = yes
 radutmp: perm = 384
 radutmp: callerid = yes
Module: Instantiated radutmp (radutmp) 
Listening on authentication *:1645
Listening on accounting *:1646
Ready to process requests.
rad_recv: Access-Request packet from host 141.201.43.115:41298, id=1, length=131
	Message-Authenticator = 0x185c9e5f078f0abbd75a8b266a4a3a3f
	User-Name = "m1k3"
	NAS-IP-Address = 141.201.43.115
	Called-Station-Id = "00-E0-63-93-75-B3"
	NAS-Port = 31005
	NAS-Port-Id = "fe.3.5"
	NAS-Port-Type = Ethernet
	Service-Type = Framed-User
	Calling-Station-Id = "00-07-E9-D5-1D-EA"
	EAP-Message = 0x02010009016d316b33
	Framed-MTU = 1300
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
  modcall[authorize]: module "preprocess" returns ok for request 0
  modcall[authorize]: module "chap" returns noop for request 0
  modcall[authorize]: module "mschap" returns noop for request 0
    rlm_realm: No '@' in User-Name = "m1k3", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 0
  rlm_eap: EAP packet type response id 1 length 9
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 0
    users: Matched entry m1k3 at line 90
  modcall[authorize]: module "files" returns ok for request 0
modcall: leaving group authorize (returns updated) for request 0
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
  rlm_eap: EAP Identity
  rlm_eap: processing type tls
  rlm_eap_tls: Initiate
  rlm_eap_tls: Start returned 1
  modcall[authenticate]: module "eap" returns handled for request 0
modcall: leaving group authenticate (returns handled) for request 0
Sending Access-Challenge of id 1 to 141.201.43.115 port 41298
	Reply-Message = "Hello, %u"
	Filter-Id == "Enterasys:version=1:mgmt=su:policy=adminrole"
	EAP-Message = 0x010200061920
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x3fcec1aa3d7db202c92bcf9353ad1438
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 141.201.43.115:41298, id=2, length=146
	Message-Authenticator = 0xf46742bbb44d8d6cc135aa6e7e5c1a5e
	User-Name = "m1k3"
	State = 0x3fcec1aa3d7db202c92bcf9353ad1438
	NAS-IP-Address = 141.201.43.115
	Called-Station-Id = "00-E0-63-93-75-B3"
	NAS-Port = 31005
	NAS-Port-Id = "fe.3.5"
	NAS-Port-Type = Ethernet
	Framed-MTU = 1300
	Service-Type = Framed-User
	Calling-Station-Id = "00-07-E9-D5-1D-EA"
	EAP-Message = 0x020200060304
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
  modcall[authorize]: module "preprocess" returns ok for request 1
  modcall[authorize]: module "chap" returns noop for request 1
  modcall[authorize]: module "mschap" returns noop for request 1
    rlm_realm: No '@' in User-Name = "m1k3", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 1
  rlm_eap: EAP packet type response id 2 length 6
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 1
    users: Matched entry m1k3 at line 90
  modcall[authorize]: module "files" returns ok for request 1
modcall: leaving group authorize (returns updated) for request 1
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 1
  rlm_eap: Request found, released from the list
  rlm_eap: EAP NAK
 rlm_eap: EAP-NAK asked for EAP-Type/md5
  rlm_eap: processing type md5
rlm_eap_md5: Issuing Challenge
  modcall[authenticate]: module "eap" returns handled for request 1
modcall: leaving group authenticate (returns handled) for request 1
Sending Access-Challenge of id 2 to 141.201.43.115 port 41298
	Reply-Message = "Hello, %u"
	Filter-Id == "Enterasys:version=1:mgmt=su:policy=adminrole"
	EAP-Message = 0x010300160410fab31c7d6ebb68541397998392f5b588
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0xd824adf37c4282ed0bb6a29dc86f3192
Finished request 1
Going to the next request
--- Walking the entire request list ---
Waking up in 5 seconds...
rad_recv: Access-Request packet from host 141.201.43.115:41298, id=3, length=166
	Message-Authenticator = 0x7fb89e66e4c86b2b24bf0138addab34a
	User-Name = "m1k3"
	State = 0xd824adf37c4282ed0bb6a29dc86f3192
	NAS-IP-Address = 141.201.43.115
	Called-Station-Id = "00-E0-63-93-75-B3"
	NAS-Port = 31005
	NAS-Port-Id = "fe.3.5"
	NAS-Port-Type = Ethernet
	Framed-MTU = 1300
	Service-Type = Framed-User
	Calling-Station-Id = "00-07-E9-D5-1D-EA"
	EAP-Message = 0x0203001a0410106bcb5f9f915e18e55a8ce1466ea25b6d316b33
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 2
  modcall[authorize]: module "preprocess" returns ok for request 2
  modcall[authorize]: module "chap" returns noop for request 2
  modcall[authorize]: module "mschap" returns noop for request 2
    rlm_realm: No '@' in User-Name = "m1k3", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 2
  rlm_eap: EAP packet type response id 3 length 26
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 2
    users: Matched entry m1k3 at line 90
  modcall[authorize]: module "files" returns ok for request 2
modcall: leaving group authorize (returns updated) for request 2
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 2
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/md5
  rlm_eap: processing type md5
  rlm_eap: Freeing handler
  modcall[authenticate]: module "eap" returns ok for request 2
modcall: leaving group authenticate (returns ok) for request 2
radius_xlat:  'Hello, m1k3'
Sending Access-Accept of id 3 to 141.201.43.115 port 41298
	Reply-Message = "Hello, m1k3"
	Filter-Id == "Enterasys:version=1:mgmt=su:policy=adminrole"
	EAP-Message = 0x03030004
	Message-Authenticator = 0x00000000000000000000000000000000
	User-Name = "m1k3"
Finished request 2
Going to the next request
Waking up in 5 seconds...
rad_recv: Accounting-Request packet from host 141.201.43.115:41299, id=1, length=66
	Acct-Status-Type = Start
	User-Name = "m1k3"
	NAS-IP-Address = 141.201.43.115
	NAS-Port = 31005
	Acct-Delay-Time = 0
	Acct-Session-Id = "26000074"
	Acct-Authentic = RADIUS
  Processing the preacct section of radiusd.conf
modcall: entering group preacct for request 3
  modcall[preacct]: module "preprocess" returns noop for request 3
rlm_acct_unique: Hashing 'NAS-Port = 31005,Client-IP-Address = 141.201.43.115,NAS-IP-Address = 141.201.43.115,Acct-Session-Id = "26000074",User-Name = "m1k3"'
rlm_acct_unique: Acct-Unique-Session-ID = "31e0ffa58f6bcbef".
  modcall[preacct]: module "acct_unique" returns ok for request 3
    rlm_realm: No '@' in User-Name = "m1k3", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[preacct]: module "suffix" returns noop for request 3
  modcall[preacct]: module "files" returns noop for request 3
modcall: leaving group preacct (returns ok) for request 3
  Processing the accounting section of radiusd.conf
modcall: entering group accounting for request 3
radius_xlat:  '/var/log/radius/radacct/141.201.43.115/detail-20060816'
rlm_detail: /var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /var/log/radius/radacct/141.201.43.115/detail-20060816
  modcall[accounting]: module "detail" returns ok for request 3
  modcall[accounting]: module "unix" returns ok for request 3
radius_xlat:  '/var/log/radius/radutmp'
radius_xlat:  'm1k3'
  modcall[accounting]: module "radutmp" returns ok for request 3
modcall: leaving group accounting (returns ok) for request 3
Sending Accounting-Response of id 1 to 141.201.43.115 port 41299
Finished request 3
Going to the next request
Waking up in 5 seconds...
rad_recv: Accounting-Request packet from host 141.201.43.115:41300, id=1, length=78
	Acct-Status-Type = Stop
	User-Name = "m1k3"
	NAS-IP-Address = 141.201.43.115
	NAS-Port = 31005
	Acct-Session-Time = 4
	Acct-Terminate-Cause = User-Request
	Acct-Authentic = RADIUS
	Acct-Delay-Time = 0
	Acct-Session-Id = "26000074"
  Processing the preacct section of radiusd.conf
modcall: entering group preacct for request 4
  modcall[preacct]: module "preprocess" returns noop for request 4
rlm_acct_unique: Hashing 'NAS-Port = 31005,Client-IP-Address = 141.201.43.115,NAS-IP-Address = 141.201.43.115,Acct-Session-Id = "26000074",User-Name = "m1k3"'
rlm_acct_unique: Acct-Unique-Session-ID = "31e0ffa58f6bcbef".
  modcall[preacct]: module "acct_unique" returns ok for request 4
    rlm_realm: No '@' in User-Name = "m1k3", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[preacct]: module "suffix" returns noop for request 4
  modcall[preacct]: module "files" returns noop for request 4
modcall: leaving group preacct (returns ok) for request 4
  Processing the accounting section of radiusd.conf
modcall: entering group accounting for request 4
radius_xlat:  '/var/log/radius/radacct/141.201.43.115/detail-20060816'
rlm_detail: /var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /var/log/radius/radacct/141.201.43.115/detail-20060816
  modcall[accounting]: module "detail" returns ok for request 4
  modcall[accounting]: module "unix" returns ok for request 4
radius_xlat:  '/var/log/radius/radutmp'
radius_xlat:  'm1k3'
  modcall[accounting]: module "radutmp" returns ok for request 4
modcall: leaving group accounting (returns ok) for request 4
Sending Accounting-Response of id 1 to 141.201.43.115 port 41300
Finished request 4
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 1 with timestamp 44e365b0
Waking up in 1 seconds...
--- Walking the entire request list ---
Cleaning up request 3 ID 1 with timestamp 44e365b1
Cleaning up request 1 ID 2 with timestamp 44e365b1
Cleaning up request 2 ID 3 with timestamp 44e365b1
Waking up in 4 seconds...
 
freeradius_md5_log.txt · Last modified: 2009/09/13 17:39 (external edit)
 
Except where otherwise noted, content on this wiki is licensed under the following license:CC Attribution-Noncommercial-Share Alike 3.0 Unported
Recent changes RSS feed Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki